Show Access-List Configuration - Extreme Networks ExtremeWare XOS Command Reference Manual

show access-list configuration

show access-list configuration
show access-list configuration
Description
Displays the ACL configuration. Currently only the state of refresh blackhole is displayed.
Syntax Description
There are no arguments or variables for this command.
Default
N/A.
Usage Guidelines
This command displays the state of the ACL refresh blackhole, set by the
enable access-list
command.
refresh blackhole
Example
The following command displays state of the ACL configuration:
show access-list configuration
The output from this command will be similar to:
Access-list Refresh Blackhole: Enabled
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide 451