configure ospf add vlan area
configure ospf add vlan [<vlan-name> | all] area <area-identifier>
{passive}
Description
Enables OSPF on one or all VLANs (router interfaces).
Syntax Description
vlan-name
all
area-identifier
passive
Default
Disabled.
Usage Guidelines
None.
Example
The following command enables OSPF on a VLAN named accounting:
configure ospf add vlan accounting area 0.0.0.1
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
Specifies the area to which the VLAN is assigned.
Specifies to stop sending and receiving hello packets on this interface.
configure ospf add vlan area
691