Show Iproute - Extreme Networks ExtremeWare XOS Command Reference Manual

show iproute

show iproute {priority | vlan <vlan_name> | permanent | <ip_address>
<netmask> | summary} {multicast | unicast} {vr <vrname>}}
Description
Displays the contents of the IP routing table or the route origin priority.
Syntax Description
priority
vlan_name
permanent
ip_address
netmask
Default
N/A.
Usage Guidelines
If a route is active and in use, it is preceded in the display by an "*". If there are multiple routes to the
same destination network, the "*" will indicate which route is the most preferable route.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays detailed information about all IP routing:
show iproute
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a route priority.
Specifies a VLAN name.
Specifies permanent routing.
Specifies an IP address.
Specifies a subnet mask.
show iproute
675