configure iparp max_pending_entries
configure iparp max_pending_entries
configure iparp max_pending_entries <max_pending_entries>
Description
Configures the maximum allowed incomplete IP ARP entries.
Syntax Description
max_pending_entries
Specifies a number of maximum IP ARP entries.
Default
256.
Usage Guidelines
Range: 1 - 20480, but cannot be greater than the configured IP ARP max_entries value.
Example
The following command sets the maximum pending IP ARP entries to 500 entries:
configure iparp max_pending_entries 500
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
613