Extreme Networks ExtremeWare XOS Command Reference Manual page 945

Version 11.0

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

The following example assumes you have already saved your runtime configuration.

The following command replicates all saved images and configurations from the master MSM to the

After you enter

, status messages similar to the following appear:

Synchronize will reboot the backup MSM, then overwrite all code images

and configs with a copy from the master MSM.

Synchronize currently requires Extremeware XOS version 11 or greater on

the backup MSM

DO NOT interrupt synchronize, the backup MSM may become unbootable!

OK to continue? (y/n) Yes

Rebooting Backup MSM...

NOTE: The command line is locked during synchronize

synchronizing...

synchronizing nvram...

synchronizing XOS...

[========================================] 100% XOS

Synchronize complete - rebooting backup MSM...

BD-10808.4 #

This command was first available in ExtremeWare XOS 11.0.

ExtremeWare XOS 11.0 Command Reference Guide

Extremeware xos 11.0