Enable Iparp Checking - Extreme Networks ExtremeWare XOS Command Reference Manual

enable iparp checking

enable iparp checking
enable iparp {vr <vr_name>} checking
Description
Enables checking if the ARP Request source IP address is within the range of the local interface or
VLAN domain.
Syntax Description
vr_name Specifies a virtual router.
Default
Enabled.
Usage Guidelines
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command enables IP ARP checking:
enable iparp checking
History
This command was available in ExtremeWare XOS 10.1.
The option was added in ExtremeWare XOS 11.0
vr
ExtremeWare XOS 11.0 Command Reference Guide 659