Configure Esrp Timer Neutral - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

configure esrp timer neutral

configure esrp <esrpDomain> timer neutral <seconds>
Description
Configures the ESRP neutral timeout value.
Syntax Description
esrpDomain
seconds
Default
The default neutral timeout is 4 seconds (two times the hello timer).
Usage Guidelines
After you create, configure, and enable the ESRP domain, it enters the neutral state. The neutral timeout
specifies the amount of time the ESRP domain stays in this temporary state before entering the slave
state. The neutral value must be at least 2 times the hello timer value. Entering a value outside of that
range generates an error message similar to the following:
operation Failed. Valid timer relationship "neighbor timeout >= 3*hello ; neutral
timeout >= 2*hello ; premaster timeout >= 3*hello"!
The range is 4 to 1024.
seconds
To see the neutral settings, use the
Example
The following command configures the ESRP neutral timeout to 8 seconds for the ESRP domain esrp1:
configure esrp esrp1 timer neutral 8
History
This command was first available in ExtremeWare XOS 11.0.
568
Specifies an ESRP domain name.
Specifies the number of seconds after which an ESRP domain. The range is 4
to 1024 seconds.
show esrp {<name>}
command.
ExtremeWare XOS 11.0 Command Reference Guide