Show Edp - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show edp

show edp {ports [all | <ports>] {detail}}
Description
Displays connectivity and configuration information for neighboring Extreme Networks switches.
Syntax Description
ports
all
detail
Default
N/A.
Usage Guidelines
On a modular switch,
<ports>
specification, see "Modular Switch Numerical Ranges" in Chapter 1.
Use the command to display neighboring switches and configurations. This is most effective
show edp
with Extreme Networks switches.
Example
The following command displays the configuration of the switch:
show edp
Following is sample output from this command:
EDP advert-interval
EDP holddown-interval
EDP enabled on ports
Following is sample output from the
Port Neighbor
=============================================================================
1:1 Oban
=============================================================================
214
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all ports.
Show detailed information.
can be a list of slots and ports. For a detailed explanation of port
:60 seconds
:180 seconds
:1:1 1:2 1:3 1:4
show edp ports 1:1
Neighbor-mac
00:00:00:30:48:41:ed:97
1:5 1:6 3:1 3:2 3:3
command:
Remote Age
Port
1:1 54
ExtremeWare XOS 11.0 Command Reference Guide
3:4
Num
Vlans
1