Show Snmpv3 Extreme-Target-Addr-Ext - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

show snmpv3 extreme-target-addr-ext

show snmpv3 extreme-target-addr-ext [[hex <hex_addr_name>] | <addr_name>]
Description
Displays information about SNMPv3 target addresses enhanced or standard mode.
Syntax Description
hex_addr_name
addr_name
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 extremeTargetAddressExtTable.
Example
The following command displays the entry for the target address named A1:
show snmpv3 extreme-target-addr-ext A1
The following is sample output from this command:
Target Addr Name
Mode
IgnoreMPModel
UseEventComm
History
This command was first available in ExtremeWare XOS 10.1.
The parameter was added in ExtremeWare XOS 11.0.
hex_addr_name
164
Specifies an identifier for the target address. The value is to be supplied as a
colon separated string of hex octets.
Specifies a string identifier for the target address.
: A1
: Enhanced
: No
: Yes
ExtremeWare XOS 11.0 Command Reference Guide