Delete Stpd - Extreme Networks ExtremeWare XOS Command Reference Manual

STP Commands

delete stpd

delete stpd <stpd_name>
Description
Removes a user-defined STPD from the switch.
Syntax Description
stpd_name Specifies a user-defined STPD name on the switch.
Default
N/A.
Usage Guidelines
If your STPD has the same name as another component, for example a VLAN, Extreme Networks
recommends that you specify the identifying keyword as well as the name. If you do not specify the
keyword, an error message similar to the following is displayed:
stpd
%% Ambiguous command: "delete Test"
In this example, to delete the STPD Test, enter .
delete stpd Test
If you created an STPD with a name unique only to that STPD, the keyword is optional.
stpd
The default STPD, s0, cannot be deleted.
Example
The following command deletes an STPD named purple_st:
delete stpd purple_st
History
This command was available in ExtremeWare XOS 10.1.
518 ExtremeWare XOS 11.0 Command Reference Guide