Configure Sntp-Client - Extreme Networks ExtremeWare XOS Command Reference Manual

configure sntp-client

configure sntp-client [primary | secondary] <host-name-or-ip> {vr
<vr_name>}
Description
Configures an NTP server for the switch to obtain time information.
Syntax Description
primary
secondary
host-name-or-ip
vr
vr_name
Default
N/A.
Usage Guidelines
Queries are first sent to the primary server. If the primary server does not respond within 1 second, or if
it is not synchronized, the switch queries the second server. If the switch cannot obtain the time, it
restarts the query process. Otherwise, the switch waits for the
querying again.
Example
The following command configures a primary NTP server:
configure sntp-client primary 10.1.2.2
The following command configures the primary NTP server to use the management virtual router
VR-Mgmt
configure sntp-client primary 10.1.2.2 vr VR-Mgmt
History
This command was first available in ExtremeWare XOS 10.1.
The
vr <vr_name>
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a primary server name.
Specifies a secondary server name.
Specifies a host name or IP address.
Specifies use of a virtual router.
Specifies the name of a virtual router.
option was added in ExtremeWare XOS 11.0.
sntp-client update interval
configure sntp-client
before
115