configure bgp peer-group route-policy
configure bgp peer-group <peer-group-name> route-policy [in | out] [none |
<policy>]
Description
Configures the policy for a peer group and all the neighbors of the peer group.
Syntax Description
peer-group-name
in
out
none
policy
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the route policy for the peer group outer and its neighbors using the
policy nosales:
configure bgp peer-group outer route-policy in nosales
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a peer group.
Specifies to install the policy on the input side.
Specifies to install the policy on the output side.
Specifies to remove the filter.
Specifies a policy.
configure bgp peer-group route-policy
823