Show Ports Qosmonitor - Extreme Networks ExtremeWare XOS Command Reference Manual

QoS Commands

show ports qosmonitor

show ports <port_list> qosmonitor {ingress | egress}
Description
Displays ingress rate shaping statistics in addition to real-time QoS statistics for egress packets on one
or more ports.
Syntax Description
port_list
egress
ingress
Default
Shows QoS statistics for egress unless you specify ingress.
Usage Guidelines
The real-time snapshot scrolls through the given portlist to provide statistics.
Examples
The following command shows the real-time QoS egress statistics related to the specified ports:
# show port 1:1-1:2 qosmonitor
Following is sample output from this command:
Port Statistics
Port
===================================================================================
1:1 100
1:2 397
====================================================================================
The following command shows the QoS ingress statistics related to the specified ports:
# show port 1:1-1:2 qosmonitor ingress
Following is sample output from this command:
Port Statistics
Port IQP1
Xmts
================================================================================
1:1
1:2
================================================================================
302
Specifies one or more slots and ports. May be in the form 3-5, 2:5, 2:6-2:8.
Specifies to display statistics in egress. Default.
Specifies to display statistics on ingress rate shaping.
QP1 QP2 QP3
Xmts Xmts Xmts
0 0
0 0
IQP2 IQP3
Xmts Xmts
0 0 0
0 0 0
QP4 QP5 QP6
Xmts Xmts Xmts
0 0 0
0 0 0
IQP4 IQP5 IQP6
Xmts Xmts Xmts
0 0 0
0 0 0
QP7 QP8
Xmts Xmts
0 4
0 1432
IQP7 IQP8
Xmts Xmts
0 0
0 0
ExtremeWare XOS 11.0 Command Reference Guide