Extreme Networks ExtremeWare XOS Command Reference Manual page 509

configure stpd ports link-type
If the switch operates in 802.1D mode, any configured port link type will behave the same as the
broadcast link type.
Example
The following command configures slot 2, ports 1 through 4 to be point-to-point links in STPD s1:
configure stpd s1 ports link-type point-to-point 2:1-2:4
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 509