Configure Bgp Neighbor Description - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp neighbor description

configure bgp neighbor
Description
Configures a description for a BGP neighbor.
Syntax Description
remoteaddr
all
description
Default
The description is a NULL string by default.
Usage Guidelines
Use this command to attach a description to a BGP neighbor. This description will be displayed in the
output of the
show bgp neighbor
a particular neighbor. Enclose the string in double quotes if there are any blank spaces in the string. The
maximum length of the string is 56 characters.
If you do not specify the
Example
The following command configures the description for the BGP neighbor 192.168.1.22 to Toledo_5:
configure bgp neighbor 192.168.1.22 description Toledo_5
History
This command was first available in ExtremeWare XOS 11.0.
798
[all | <remoteaddr>] description {<description>}
Specifies an IP address of a BGP neighbor.
Specifies all neighbors.
Specifies a string used to describe the neighbor.
command when you specify the
parameter, the description will be reset to the default.
<description>
option, or when you specify
detail
ExtremeWare XOS 11.0 Command Reference Guide