Configure Snmpv3 Engine-Id - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmpv3 engine-id

configure snmpv3 engine-id <hex_engine_id>
Description
Configures the SNMPv3 snmpEngineID.
Syntax Description
hex_engine_id
Default
The default
snmpEngineID
Usage Guidelines
Use this command if the
are fixed to 80:00:07:7C,which represents Extreme Networks Vendor ID. Once the
changed, default users will be reverted back to their original passwords/keys, while non-default users
will be reset to the security level of no authorization, no privacy.
In a chassis, the
snmpEngineID
switch boots first. For MSM hitless failover, the same
MSMs.
Example
The following command configures the
configure snmpv3 engine-id 00:0a:1c:3e:11
History
This command was first available in ExtremeWare XOS 10.1.
114
Specifies the colon delimited hex octet that serves as part of the
snmpEngineID (5-32 octets).
is the device MAC address.
needs to be explicitly configured. The first four octets of the ID
snmpEngineID
will be generated using the MAC address of the MSM with which the
snmpEngineID
will be propagated to both of the
snmpEngineID
to be 80:00:07:7C:00:0a:1c:3e:11:
is
snmpEngineID
ExtremeWare XOS 11.0 Command Reference Guide