Disable Icmp Useredirects - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.0

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

IP Unicast Commands

disable icmp useredirects

Disables the modification of route table information when an ICMP redirect message is received.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

This option only applies to the switch when the switch is not in routing mode.

The following command disables the changing of routing table information:

disable icmp useredirects

This command was available in ExtremeWare XOS 10.1.

ExtremeWare XOS 11.0 Command Reference Guide

Extremeware xos 11.0