Extreme Networks ExtremeWare XOS Command Reference Manual page 489

Hello Timer interval:
Fail Timer interval:
Failtimer expiry action:
Preforwarding Timer interval:
Last update: 1
EAPS Domain has ... Controller
Vlans:
EAPS Domain has ... Protected
Vlans: 2
Number of Protected Vlans:
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the
Example
The following display shows sample output for the command
EAPS Enabled: Yes
EAPS Fast-Convergence: Off
Number of EAPS instances: 2
# EAPS domain configuration :
--------------------------------------------------------------------------------
Domain
--------------------------------------------------------------------------------
d1
d2
--------------------------------------------------------------------------------
The following display shows sample output for the command
Name: d1
State: Complete
Enabled: Yes
Primary port:
Secondary port: 3:16
Hello timer interval: 1
Fail timer interval:
Fail Timer expiry action: Send alert
Last update: From Master Id 00:01:30:f9:9c:b0, at Wed Jun
EAPS Domain has following Controller Vlan:
Vlan Name
c1
EAPS Domain has following Protected Vlan(s):
Vlan Name
p_1
p_2
ExtremeWare XOS 11.0 Command Reference Guide
The configured value of the timer in seconds, specifying the time that the
master node waits between transmissions of health check packets.
The configured value of the timer in seconds, specifying the time that the
master node waits before the failtimer expires.
Displays the action taken when the failtimer expires:
• Send-alert—Sends a critical message to the syslog when the failtimer
expires.
• Open-secondary-port—Opens the secondary port when the failtimer
expires.
Displays only for master nodes.
1
The configured value of the timer. This value is set internally by the EAPS
software.
Displayed only for transit nodes; indicates the last time the transit node
received a hello packet from the master node (identified by its MAC address).
Lists the assigned name and ID of the control VLAN.
Lists the assigned names and VLAN IDs of all the protected VLANs
configured on this EAPS domain.
The count of protected VLANs configured on this EAPS domain.
State Mo En
Complete M Y
Links-Up T Y
Mode: Master
3:8 Port status: Up Tag status: Tagged
Port status: Blocked
sec
3 sec
VID
1000
VID
1
2
show eaps command.
show eaps
Pri Sec Control-Vlan VID
3:8 3:16 c1
3:8 3:16 c2
show eaps <eapsDomain>
Running: Yes
Tag status: Tagged
show eaps
:
Count
(1000) 100
(1001) 100
:
9 09:09:35 2004
489