Enable Ip-Option Loose-Source-Route - Extreme Networks ExtremeWare XOS Command Reference Manual
Version 11.0
Hide thumbs
Also See for ExtremeWare XOS:
- Command reference manual (2024 pages) ,
- Manual (698 pages) ,
- Manual (256 pages)
Table of Contents
Advertisement
IP Unicast Commands
enable ip-option loose-source-route
enable ip-option loose-source-route
Description
Enables the loose source route IP option.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
None.
Example
The following command enables the loose source route IP option:
enable ip-option loose-source-route
History
This command was available in ExtremeWare XOS 10.1.
662
ExtremeWare XOS 11.0 Command Reference Guide
Advertisement
Table of Contents
