Configure Diffserv Examination Code-Point - Extreme Networks ExtremeWare XOS Command Reference Manual

configure diffserv examination code-point

configure diffserv examination code-point <code-point> [qosprofile
<qosprofile>]
Description
Configures the default ingress DiffServ code points (DSCP) to QoS profile mapping.
Syntax Description
code-point
qosprofile
Default
See Table 9.
Usage Guidelines
You can specify up to 64 different code points for each port. Code point values are grouped and
assigned to the default QoS profiles as shown in Table 9:
Table 9: Default code point-to-QoS profile mapping
Code Point
0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
Example
The following command specifies that code point 25 be assigned to QP2:
configure diffserv examination code-point 25 qosprofile qp2
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a DiffServ code point (a 6-bit value in the IP-TOS byte in the IP
header).
Specifies the QoS profile to which the DiffServ code point is mapped.
QoS Profile
QP1
QP2
QP3
QP4
QP5
QP6
QP7
QP8
configure diffserv examination code-point
283