Show Iparp Proxy - Extreme Networks ExtremeWare XOS Command Reference Manual

show iparp proxy

show iparp proxy {[<ipNetmask> | <ip_addr> <mask>]} {vr <vr_name>}
Description
Displays the proxy ARP table.
Syntax Description
ipNetmask
ip_address
mask
vr_name
Default
N/A.
Usage Guidelines
If no argument is specified, then all proxy ARP entries are displayed.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays the proxy ARP table:
show iparp proxy 10.1.1.5/24
History
This command was available in ExtremeWare XOS 10.1.
The option was added in ExtremeWare XOS 11.0
vr
ExtremeWare XOS 11.0 Command Reference Guide
Specifies an IP address/mask length.
Specifies an IP address.
Specifies a subnet mask.
Specifies a virtual router.
show iparp proxy
673