Show Power Controller - Extreme Networks ExtremeWare XOS Command Reference Manual

show power controller

show power controller {<num>}
Description
Displays the current status of the installed power supply controllers.
Command Syntax
num
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the power supply controllers.
Power controllers collect data about the installed power supplies and report the results to the MSM
This status information may be useful for your technical support representative if you have a network
problem.
The switch collects the following power supply controller information:
• State—Indicates the current state of the power supply controller. Options are:
— Empty: There is no power supply controller installed.
— Operational: The power supply controller is installed and operational.
— Present: The power supply controller is installed.
• PartInfo—Provides information about the power supply controller including the:
— Slot number where the power supply controller is installed.
— Serial number, a collection of numbers and letters, that make up the serial number of the power
supply controller.
— Part number, a collection of numbers and letters that make up the part number of the power
supply controller.
• Revision—Displays the revision number of the power supply controller.
• FailureCode—Specifies the failure code of the power supply controller.
• Odometer—Specifies the date and how long the power supply controller has been operating.
• Temperature—Specifies, in celsius, the current temperature of the power supply controller.
• Status—Specifies the status of the power supply controller.
Example
The following command displays the status of the installed power supply controllers:
show power controller
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the slot number of the installed power supply controller.
show power controller
145