configure bgp cluster-id
configure bgp cluster-id <cluster-id>
Description
Configures the local cluster ID.
Syntax Description
cluster-id
Default
N/A.
Usage Guidelines
Used when multiple route reflectors are used within the same cluster of clients.
Extreme Networks recommends disabling BGP before configuring the cluster ID.
Example
The following command appends a BGP route reflector cluster ID to the cluster list of a route:
configure bgp cluster-id 40000
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a 4 byte field used by a route reflector to recognize updates from
other route reflectors in the same cluster. The range is 0 - 4294967295.
configure bgp cluster-id
787