Configure Eaps Mode - Extreme Networks ExtremeWare XOS Command Reference Manual

configure eaps mode

configure eaps <name> mode [master | transit]
Description
Configures the switch as either the EAPS master node or as an EAPS transit node for the specified
domain.
Syntax Description
name
master
transit
Default
N/A.
Usage Guidelines
None.
Example
The following command identifies this switch as the master node for the domain named eaps_1:
configure eaps eaps_1 mode master
The following command identifies this switch as a transit node for the domain named eaps_1:
configure eaps eaps_1 mode transit
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the name of an EAPS domain.
Specifies that this switch should be the master node for the named EAPS
domain.
Specifies that this switch should be the transit node for the named EAPS
domain.
configure eaps mode
479