QoS Commands
disable diffserv replacement port
disable diffserv replacement port [<port_list> | all]
Description
Disables the replacement of DiffServ code points in packets transmitted by the switch.
Syntax Description
port_list
all
Default
N/A.
Usage Guidelines
The DiffServ replacement feature is disabled by default.
Example
The following command disables DiffServ replacement on selected ports:
disable diffserv replacement ports 1:2,5:5,6:6
History
This command was first available in ExtremeWare XOS 11.0.
294
Specifies a list of slots and ports to which the parameters apply. May be in the
form 3-5, 2:5, 2:6-2:8.
Specifies that DiffServ replacement should be disabled for all ports.
ExtremeWare XOS 11.0 Command Reference Guide