Configure Vrrp Vlan Vrid Advertisement-Interval - Extreme Networks ExtremeWare XOS Command Reference Manual

VRRP Commands

configure vrrp vlan vrid advertisement-interval

configure vrrp vlan <vlan_name> vrid <vridval> advertisement-interval
<interval>
Description
Configures the time between VRRP advertisements (pings) in seconds.
Syntax Description
vlan_name
vridval
interval
Default
The advertisement interval is 1 second.
Usage Guidelines
The advertisement interval specifies the interval between advertisements sent by the master router to
inform the backup routers that its alive.
An extremely busy CPU can create a short dual master situation. To avoid this, increase the
advertisement interval.
Example
The following command configures the advertisement interval of 15 seconds:
configure vrrp vlan vrrp-1 vrid 1 advertisement-interval 15
History
This command was first available in ExtremeWare XOS 10.1.
588
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of
1-255.
Specifies the time interval between advertisements, in seconds. The default is
1 second. The range is 1 through 255.
ExtremeWare XOS 11.0 Command Reference Guide