Create Esrp - Extreme Networks ExtremeWare XOS Command Reference Manual

create esrp

create esrp <esrpDomain>
Description
Creates an ESRP domain with the specified name on the switch.
Syntax Description
esrpDomain
Default
The ESRP domain is disabled and in the "Aware" state.
When an ESRP domain is created, it has the following default parameters:
• Operational version—Extended
• Priority—0
• VLAN interface—none
• VLAN tag—0
• Hello timer—2 seconds
• Neighbor timer—8 seconds
• Premaster timer—6 seconds
• Neutral timer—4 seconds
• Neighbor restart timer—30 seconds
• VLAN tracking—none
• Ping tracking—none
• IP route tracking—none
Usage Guidelines
The maximum length for a name is 32 characters. Names can contain alphanumeric characters and
underscores ( _ ) but cannot be any reserved keywords, for example, esrp. Names must start with an
alphabetical character, for example, a, Z.
Each ESRP domain name must be unique and cannot duplicate any other named ESRP domains on the
switch. If you are uncertain about the ESRP names on the switch, use the
the ESRP domain names. After you create an ESRP domain on the switch, the switch is ESRP-aware.
You can create a maximum of 64 ESRP domains.
Example
The following command creates ESRP domain esrp1 on the switch:
create esrp esrp1
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the name of an ESRP domain to be created. May be up to 32
characters in length.
create esrp
command to view
show esrp
571