Extreme Networks ExtremeWare XOS Command Reference Manual page 97

configure snmpv3 add target-params
Example
The following command specifies a target parameters entry named P1, a user name of guest, message
processing and security model of SNMPv2c, and a security level of no authentication:
configure snmpv3 add target-params P1 user guest mp-model snmpv2c sec-model snmpv2c
sec-level noauth
History
This command was first available in ExtremeWare XOS 10.1.
The and parameters were added in ExtremeWare XOS 11.0.
hex_param_name hex_user_name
ExtremeWare XOS 11.0 Command Reference Guide 97