Security Commands
show access-list
show access-list {<aclname>}
Description
Displays the interfaces configured with a specified ACL, or all configured interfaces.
Syntax Description
aclname
Default
The default is to display all configured interfaces.
Usage Guidelines
The ACL with the port and VLAN displayed as an asterisk (*) is the wildcard ACL.
Example
The following command displays the all the interfaces configured with an ACL:
show access-list
The output from this command will be similar to:
VLAN
Port
ACL Name
========================================
4:1
zone04
4:2
zone04
6:2
zone04
6:7
zone04
2:1
test
3:2
test
*
*
mydefault
History
This command was available in ExtremeWare XOS 10.1.
450
Specifies the ACL name. The name can be from 1-32 characters long.
Dir
ingress
ingress
ingress
ingress
ingress
ingress
ingress
ExtremeWare XOS 11.0 Command Reference Guide