Commands for Configuring Slots and Ports on a Switch
disable edp ports
disable edp ports [<ports> | all]
Description
Disables the Extreme Discovery Protocol (EDP) on one or more ports.
Syntax Description
ports
all
Default
Enabled.
Usage Guidelines
On a modular switch,
<ports>
specification, see "Modular Switch Numerical Ranges" or "Line-Editing Keys" in Chapter 1.
You can use the
disable edp ports
longer need to locate neighbor Extreme Networks switches.
Example
The following command disables EDP on slot 1, ports 2 and 4 on a modular switch:
disable edp ports 1:2, 1:4
History
This command was first available in ExtremeWare XOS 10.1.
196
Specifies one or more slots and ports. May be in the form 3-5, 2:*, 2:5,
2:6-2:8.
Specifies all ports on the switch.
can be a list of slots and ports. For a detailed explanation of port
command to disable EDP on one or more ports when you no
ExtremeWare XOS 11.0 Command Reference Guide