BGP Commands
show bgp neighbor
show bgp [neighbor {detail} | neighbor <remoteaddr>]
Description
Displays information about a specified neighbor.
Syntax Description
remoteaddr
detail
Default
N/A.
Usage Guidelines
Use this command to display information about a specific BGP neighbor. If you do not specify a
neighbor, information about all neighbors is displayed.
Example
The following command displays information about a specified neighbor:
show bgp neighbor 10.10.10.10
History
This command was available in ExtremeWare XOS 10.1.
868
Specifies an IP address that identifies a BGP neighbor.
Specifies to display the information in detailed format.
ExtremeWare XOS 11.0 Command Reference Guide