Configure Ospf Area Delete Range - Extreme Networks ExtremeWare XOS Command Reference Manual

IGP Commands

configure ospf area delete range

configure ospf area <area-identifier> delete range [<ip-address> <ip-mask>
| <ipNetmask>]
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
area-identifier
ip-address
ip-mask
ipNetmask
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was available in ExtremeWare XOS 10.1.
696
Specifies an OSPF area.
Specifies an IP address.
Specifies a subnet mask.
Specifies IP address / Netmask.
ExtremeWare XOS 11.0 Command Reference Guide