Configure Ospf Vlan Neighbor Add - Extreme Networks ExtremeWare XOS Command Reference Manual

IGP Commands

configure ospf vlan neighbor add

configure ospf vlan <vlan-name> neighbor add <ip-address>
Description
Configures the IP address of a point-to-point neighbor.
Syntax Description
vlan-name
ip-address
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor add 10.0.0.1
History
This command was available in ExtremeWare XOS 10.1.
714
Specifies a VLAN name.
Specifies an IP address.
ExtremeWare XOS 11.0 Command Reference Guide