Extreme Networks ExtremeWare XOS Command Reference Manual page 329

configure log target severity
To see the current configuration of a target, use the following command:
show log configuration target {console | memory-buffer | nvram | primary-msm |
backup-msm | session | syslog <ipaddress> [local0 ... local7]}
To see the current configuration of a filter, use the following command:
show log configuration filter {<filter name>}
Example
The following command sends log messages to the current session, that pass the current filter at a
severity level of info or greater, and contain the string user5:
configure log target session severity info
History
This command was first available in ExtremeWare XOS 10.1.
The and options were first available in ExtremeWare XOS 11.0.
primary-msm backup-msm
ExtremeWare XOS 11.0 Command Reference Guide 329