Show Snmpv3 Filter-Profile - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

show snmpv3 filter-profile

show snmpv3 filter-profile {[[hex <hex_profile_name>] | <profile_name>]}
{param [[hex <hex_param_name>] | <param_name>]}
Description
Displays the association between parameter names and filter profiles.
Syntax Description
hex_profile_name
profile_name
hex_param_name
param_name
Default
N/A.
Usage Guidelines
Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with
a parameter name. The parameter name is associated with target addresses, and the filter profile is
associated with a series of filters, so, in effect, you are associating a series of filters with a target address.
Example
The following command displays the entry with filter profile prof1 with the parameter name P1:
show snmpv3 filter-profile prof1 param P1
The following is sample output of this command:
Filter Profile Params Name : p1
Name
Storage Type
Row Status
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_profile_name
156
Specifies the filter profile name. The value is to be supplied as a colon
separated string of hex octets.
Specifies the filter profile name in ASCII format.
Specifies the parameter name. The values is to be supplied as a colon
separated string of hex octets.
Specifies the parameter name in ASCII format.
: prof1
: NonVolatile
: Active
and parameters were added in ExtremeWare XOS 11.0.
hex_param_name
ExtremeWare XOS 11.0 Command Reference Guide