Troubleshooting Commands - Extreme Networks ExtremeWare XOS Command Reference Manual

B

Troubleshooting Commands

If you encounter problems when using your switch, ExtremeWare XOS provides troubleshooting
commands. Use these commands only under the guidance of Extreme Networks technical personnel.
You can contact Extreme Networks technical support at (800) 998-2408 or (408) 579-2826.
The Event Management System (EMS) provides enhanced features to filter and capture information
generated on a switch. Details of using EMS are discussed in the ExtremeWare XOS User Guide, in the
chapter, "Status Monitoring and Statistics", and the commands used for EMS are detailed in this
document in Chapter 9, "Commands for Status Monitoring and Statistics."
Included in this chapter, as well as in Chapter 9, are the EMS commands to enable and disable debug
mode for EMS components.
ExtremeWare XOS 11.0 Command Reference Guide 951