Configure Bgp Neighbor Send-Community - Extreme Networks ExtremeWare XOS Command Reference Manual

configure bgp neighbor send-community

configure bgp neighbor [<remoteaddr> | all] {address-family [ipv4-unicast |
ipv4-multicast]} [send-community | dont-send-community]
Description
Configures whether the community path attribute associated with a BGP NLRI should be included in
the route updates sent to the BGP neighbor.
Syntax Description
remoteaddr
all
address-family
send-community
dont-send-community
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
A BGP community is a group of BGP destinations that require common handling. ExtremeWare XOS
supports the following well-known BGP community attributes:
• no-export
• no-advertise
• no-export-subconfed
Example
The following command includes the community path attribute associated with a BGP NLRI in the
route updates sent to all BGP neighbors:
configure bgp neighbor all send-community
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies an IP address of a BGP neighbor.
Specifies all neighbors.
The address family. BGP supports two address families: IPv4 Unicast and
IPv4 Multicast.
Specifies to include the community path attribute.
Specifies not to include the community path attribute.
configure bgp neighbor send-community
807