Logging Traps - Dell PowerEdge M420 Reference Manual

Command Mode
Global Configuration mode
User Guidelines
Log messages at or above this severity level are considered urgent. By default,
Emergency and Alert log messages are considered urgent. Urgent log
messages are emailed immediately, one log message per email message, and
do not wait for the log time to expire. Urgent log messages are not emailed
unless you enable email alerting with the logging email command.

logging traps

Use the logging traps command in Global Configuration mode to set the
lowest severity level at which SNMP traps are logged. To revert the urgent
severity level to its default value, use the no form of this command.
Syntax
severity
logging traps
no logging traps
Parameter Description
Parameter
severity
Description
The severity level at which SNMP traps are logged. The severity
level may either be specified by keyword or as an integer from 0
to 7. The accepted keywords, and the numeric severity level
each represents, are as follows:
• emergency (0)
• alert (1)
• critical (2)
• error (3)
• warning (4)
• notice (5)
• info (6)
• debug (7)
Email Alerting Commands
359