Static/Dhcp Ip Controlled By Front Panel Button - Dell PowerEdge C410x Hardware Owner's Manual

Static/DHCP IP Controlled by Front Panel Button

 To switch from DHCP to static or vice versa:

Hold down the ID button for 5 seconds

While pressing the ID button, press and hold the power button for 5 seconds

Release the power button, and then the ID button

It will take ~30 seconds to change the configuration

The ID light will indicate which mode has been selected:
- Solid for 5 seconds indicates static IP
- Flashing for 5 seconds indicates DHCP
 If the default IP address is changed, switching DHCP to static IP will change the IP address back to the
default.
 The default IP address is 192.168.0.120
BMC Remote Management Console | 78