Chapter 4: Bmc Remote Management Console; Initial Configuration Via Dhcp Server - Dell PowerEdge B02S Hardware Owner's Manual

Chapter 4: BMC Remote Management Console

This chapter provides information on the various functions of the Dell Remote Management Console GUI's
(Graphics User Interface).

Initial Configuration via DHCP Server

Before entering the Dell Remote Management Console, you need to connect the DHCP server in the
subnet to which it is physically connected. If a DHCP server is found, it may provide a valid IP address,
gateway address and net mask. Before you connect the device to your local subnet, be sure to complete
the corresponding configuration of your DHCP server. It is recommended to configure a fixed IP
assignment to the MAC address of the system.
32