Logging Email Message-Type To-Addr - Dell PowerEdge M420 Reference Manual

Default Configuration
The default severity level is info(6).
Command Mode
Global Configuration mode
User Guidelines
You can filter log messages that appear in the buffered log by severity level.
You can specify the severity level of log messages that are emailed. You can
use this command to specify the severity level at which SNMP traps are
logged, and thus control whether traps appear in the buffered log or are
emailed and, if they are emailed, whether traps are considered urgent or non-
urgent.

logging email message-type to-addr

Use the logging email message-type to-addr command in Global
Configuration mode to configure the To address field of the email. The
message types supported now are urgent, non-urgent, and both. For each
supported severity level, multiple email addresses can be configured. For
example, for urgent type of messages, there could be multiple addresses
configured.
Syntax
to-email-
logging email message-type {urgent | non-urgent | both} to-addr
addr
to-addr
no logging email to-addr message-type
to-
no logging email message-type {urgent | non-urgent | both} to-addr
email-addr
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
360
Email Alerting Commands