Show Ip Dhcp Snooping Binding - Dell PowerEdge M420 Reference Manual

---------
1/0/1
1/0/2
1/0/3
1/0/4
1/0/6

show ip dhcp snooping binding

Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{ static | dynamic } ] [ interface
id vlan-id
] [ vlan
static | dynamic— Use these keywords to filter by static or dynamic
•
bindings.
• interface-id—The interface for which to show bindings.
• vlan-id— The number of the VLAN for which to show bindings.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping binding
Total number of bindings: 2
-------- ----------------
Yes
No
No
No
No
]
No
Yes
Yes
No
No
DHCP Snooping Commands
interface-
335