show ip pimsm rp
This command displays the PIM information for candidate Rendezvous Points (RPs) for all IP
multicast groups or for the specific groupaddress groupmask provided in the command. The
information in the table is displayed for each IP multicast group.
show ip pimsm rp {groupaddress groupmask | candidate | all}
Syntax
Mode
Privileged Exec and User Exec
Group Address—This field specifies the IP multicast group address.
Group Mask—This field specifies the multicast group address subnet mask.
Address—This field displays the IP address of the Candidate-RP.
Hold Time—This field displays the hold time of a Candidate-RP.
Expiry Time—This field displays the minimum time remaining before the Candidate-RP will be declared
down.
Component—This field displays a number which uniquely identifies the component. Each protocol
instance connected to a separate domain should have a different index value.
show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The RP
router, for the group, is selected by using the hash algorithm defined in RFC 2362.
show ip pimsm rphash groupaddress
Syntax
Mode
Privileged Exec and User Exec
RP IP Address—This field displays the IP address of the RP.
Group Mask—This field displays the group mask for the group address.
PIM Commands | 497