Ip-Pad Data Assignment - NEC NEAX2000 IPS System Manual

CÔNG TY VIỄN THÔNG VIỆT PRO

IP-PAD DATA ASSIGNMENT

In addition to the system constitution data for IP-PAD, do the following programming.
The IP-PAD is required for the following connections.
term
– D IP-to-Legacy terminal connection
term
– D IP-to-Public Network/Tie Line Network connection
– External hold tone connection
– Conference Trunk (CFT) connection
– Digital Announcement Trunk (DAT) connection
START
CM0A Define the LAN Interface of the IP-PAD card.
NOTE 1:
NOTE 2:
NOTE 3:
A
Chuyên phân phối tổng đài NEC
DESCRIPTION
IP-PAD INITIAL
Maximum 8 LAN Interface number
can be assigned for IP-PAD cards.
Use the LAN Interface number 00-
15.
In the Remote PIM over IP system,
maximum 32 LAN Interface number
can be assigned for IP-PAD cards.
LAN Interface number 00-31 can be
used.
Set the IP-PAD serial number according to the accommodated PIM and slot as follows.
[For PN-32IPLA/PN-32IPLA-A]
• When accommodated in odd numbered PIM (PIM1/3/5/7)
PIM
IP- IP-
1/3/5/7
PAD PAD
No. 2 No. 3
• When accommodated in even numbered PIM (PIM0/2/4/6)
PIM
IP- IP-
0/2/4/6
PAD PAD
No. 0 No. 1
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=00
(1) 00-31: LAN Interface No.
(2) XXZ
XX: FP No. 00-59 which accommodates
the IP-PAD
Z : IP-PAD No. 0-3
NONE : No data
– 146 –
http://vietpro.com.vn
IP-PAD DATA ASSIGNMENT
DATA
NOTE 1, NOTE 2
NOTE 3
ND-71503(E) Rev.5.0
9pch3001.fm
JANUARY/16/2004