Received Dialed Number; Both - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Program
Program Name
Number
35-02-08 SMDR Output Options –
Incoming Call
35-02-09 SMDR Output Options –
Extension Number or Name
35-02-10 SMDR Output Options – All
Lines Busy (ALB) Output
35-02-11 SMDR Output Options – Walking
Toll Restriction Table Number
35-02-12 SMDR Output Options – DID
Table Name Output
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
35-02-14 SMDR Output Options – Date
35-02-15 SMDR Output Options – CLI/DID
Number Switching
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
Station Message Detail Recording
Description/Comments
Enable this option (1) to have the
SMDR report include incoming
calls. If you disable this option (0),
incoming calls do not print.
Set this option to 1 to have the
SMDR report include extension
numbers. Set this option to 0 to
have the SMDR report include
extension names.
Determine if the All Lines Busy
(ALB) indication should be
displayed.
Set the SMDR (Station Message
Detail Recording) walking toll
restriction table number output
options for each of the eight
SMDR ports.
Determine if the DID table name
should be displayed for incoming
DID calls.
Determine if the Caller ID should
be displayed when the incoming
DID number is transferred to an
outgoing trunk.
Determine whether or not the date
should be displayed on SMDR
reports.
 This option must be set to 0 if
the trunk name is set to be
displayed in Program
35-02-03.
Determine whether the CLI or DID
Calling Number should be
displayed.
Determine how the SMDR should
print incoming calls on ANI/DNIS
or DID trunks. If set to 1, ANI/DNIS
trunks can print DNIS digits.If set
to 0 trunk names are printed
instead (assigned in Program
14-01-01).
Assigned Data
1
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Output
1 = Output
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = CLI (CLIP)
1 = DID Calling
Number
2 = Caller ID Name
(default = 0)
0 = Trunk Port Name
1 = Received Dialed
Number

2 = Both

(default = 0)
Issue 11.0
Level
2 3









2 - 1429