34-09: Ani/Dnis Service Options - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 34-09: ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Input Data
Item
No.
01
Receive Format
Use this option to specify the format
of the ANI/DNIS data received from
the telco. Make sure your entry is
compatible with the service the telco
provides. The character  indicates a
delimiter.

02
Delimiter Dial Code
This option defines the character
Telco uses as a delimiter (see entries
1~5 in Item 1 above). Valid entries
are 0~9,
03
Route Setup of Receive Dial
This option specifies the source of
the data the system uses to route
incoming ANI/DNIS calls. If option 2
is selected, refer to Program 34-09-
04.
2 - 462
Class of Service
Name
If PRG34-01-02 is selected to 2
(MF), this PRG works only as 4
=*ANI*DNIS*.
, and .
#
Program 34 : Tie Line Setup

34-09: ANI/DNIS Service Options

Input Data
0 = Address
1 = ANI
 
2 = DNIS
 
3 = ANI Address
  
4 = ANI DNIS
  
5 = DNIS ANI
  
( = Delimiter Code)

1~9, 0, ,
#

0 = Fixed Route (Item
08) (No Routing)
1 = Routes on
Received DNIS or
Address Data
2 = Routes on
Received ANI
Data
UNIVERGE SV8100
01~15
Default Default
Related
Program
COS
COS 1
2~15
0 0 34-01-02
34-09-02
34-09-01
 
0 0 22-09-01
22-11-01
34-09-04
34-09-08
Program 34 : Tie Line Setup