Tpc Output Control Register (Tpcr) - Hitachi SH7032 Hardware Manual

• Bits 7–0 (Next Data Enable 15–8 (NDER15–NDER8)): NDER15–NDER8 select
enabling/disabling for TPC output groups 3 and 2 (TP15–TP8) in bit units.
Bit 7–0:
NDER15–NDER8
0
1
11.2.7

TPC Output Control Register (TPCR)

TPCR is an eight-bit read/write register that selects output trigger signals for TPC outputs. TPCR
is initialized to H'FF by a reset. It is not initialized in standby mode.
Bit:
Bit name: G3CMS1 G3CMS0 G2CMS1 G2CMS0 G1CMS1 G1CMS0 G0CMS1 G0CMS0
Initial value:
R/W:
• Bits 7 and 6 (Group 3 Compare Match Select 1 and 0 (G3CMS1 and G3CMS0)): G3CMS1
and G3CMS0 select the compare match that triggers TPC output group 3 (TP15–TP12).
Bit 7: G3CMS1 Bit 6: G3CMS0
0 0
1
1 0
1
Description
Disables TPC outputs TP15–TP8 (transfer from NDR15–NDR8 to
PB15–PB8 is disabled)
Enables TPC outputs TP15–TP8 (transfer from NDR15–NDR8 to
PB15–PB8 is enabled)
7 6
1 1
R/W R/W R/W
Description
TPC output group 3 (TP15–TP12) output is triggered by
compare match in ITU channel 0
TPC output group 3 (TP15–TP12) output is triggered by
compare match in ITU channel 1
TPC output group 3 (TP15–TP12) output is triggered by
compare match in ITU channel 2
TPC output group 3 (TP15–TP12) output is triggered by
compare match in ITU channel 3
5 4 3
1 1 1
R/W R/W
(Initial value)
2 1
1 1
R/W R/W R/W
(Initial value)
0
1
319