Hitachi SH7032 Hardware Manual page 49

Table 1.3 Pin Functions (cont)
Type Symbol
TIOCA4,
16-bit
TIOCB4
integrated
timer pulse
TOCXA4,
unit (ITU)
TOCXB4
TCLKA–
TCLKD
Timing TP15–
pattern TP0
controller
(TPC)
TxD0,
Serial com-
TxD1
munication
interface
RxD0,
(SCI)
RxD1
SCK0,
SCK1
A/D AN7–
converter AN0
ADTRG
AV
ref
AV
CC
AV
SS
I/O ports PA15–
PA0
PB15–
PB0
PC7–
PC0
14
Pin No. Pin No.
(FP-112) (TFP-120)
102, 103 109, 110
104, 105 111, 112
66, 67, 104, 71, 72, 111,
105 112
2, 1, 3, 2,
112–107, 119–114,
105–100, 112–107,
98, 97 105, 103
108, 110 115, 117
107, 109 114, 116
111, 112 118, 119
95–92, 101–98,
90–87 96–93
63 68
86 92
85 91
91 97
69–62, 74–67,
60–53 65–62,
59–56
2, 1, 3, 2,
112–107, 119–114,
105–100, 112–107,
98, 97 105, 103
95–92, 101–98,
90–87 96–93
I/O Name and Function
I/O ITU input capture/output compare (channel 4):
Input capture or output compare pins.
O ITU output compare (channel 4): Output
compare pins.
I ITU timer clock input: External clock input pins
for ITU counters.
O Timing pattern output 15-0: Timing pattern
output pins.
O Transmit data (channels 0 and 1): Transmit
data output pins for SCI0 and SCI1.
I Receive data (channels 0 and 1): Receive
data input pins for SCI0 and SCI1.
I/O Serial clock (channels 0 and 1): Clock
input/output pins for SCI0 and SCI1.
I Analog input: Analog signal input pins.
I A/D trigger input: External trigger input for
starting A/D conversion.
I Analog reference power supply: Input pin for
the analog reference voltage.
I Analog power supply: Power supply pin for
analog circuits. Connect to the V
I Analog ground: Power supply pin for analog
circuits. Connect to the V
I/O Port A: 16-bit input/output pins. Input or output
can be selected individually for each bit.
I/O Port B: 16-bit input/output pins. Input or output
can be selected individually for each bit.
I Port C: 8-bit input pins.
potential.
CC
potential.
SS