Usage Notes; Non-Overlap Operation - Hitachi SH7032 Hardware Manual

11.4

Usage Notes

11.4.1

Non-Overlap Operation

During non-overlap operation, transfers from NDR to data registers (DR) occur as follows.
1. NDR contents are always transferred to DR on compare match A.
2. The contents of bits transferred from NDR are only transferred on compare match B when they
are 0. No transfer occurs for a 1.
Figure 11.9 illustrates TPC output during non-overlap operation.
TPC output pin
332
CR
Q
Port function
select
Figure 11.9 TPC Output Non-Overlap Operation
NDER
Q
C
Q DR D
Compare match A
Compare match B
Q NDR D