Precautions When Setting The Parameters; Precautions When Setting The Circuit Numbers; Precautions When Setting Module Configuration Definitions - YASKAWA MP3300 series Product Manual

1.4

Precautions When Setting the Parameters

Observe the following precautions when setting the Machine Controller.
1.4.1

Precautions When Setting the Circuit Numbers

When assigning circuit numbers to the Motion Control and Communications Function Modules,
the numbers must be within the following ranges.
Function Modules in
CPU Module
Optional Modules
1.4.2 Precautions When Setting Module Configuration
Definitions
Observe the following precautions when writing module configuration definitions.
• Write the module configuration definitions only when the high-speed scan has sufficient
unused processing time.
Otherwise, processing may exceed the time limit of the high-speed scan.
• Before writing module configuration definitions, make sure the machine is not in operation.
• Before you use the Machine Controller, save any written data to flash memory and turn the
power supply to the Racks OFF and ON again.
Unit
SVC and SVR
Motion Control
Function Module
SVC32 and SVR32
Communications
218IFD
Function Module
SVA-01 (SVA), SVB-01 (SVB01),
Motion Modules SVC-01 (SVC), MPU-01 (MPUIF),
PO-01 (PO)
217IF-01 (217IF)
218IF-01 (218IF), 218IF-02 (218IFB),
260IF-01 (260IF (DeviceNet)),
261IF-01 (261IFS (Profibus)),
262IF-01 (FL-net),
Communications
263IF-01 (EtherNet/IP),
Modules
264IF-01 (EtherCAT-S),
265IF-01 (Componet),
266IF-01, 266IF-02,
215AIF-01 (MPLINK),
215AIF-01 (CP-215),
267IF-01 (CC-Link)

1.4 Precautions When Setting the Parameters

1.4.1 Precautions When Setting the Circuit Numbers

Abbreviations of Built-in Modules
Circuit
numbers
1 to 16
1 to 16
1 to 8
1 to 16
1 to 16
1 to 8
1
1-9